Bizhub C220 Installation Manual
Installation space (unit: mm (inch)) IV. Accessory parts bizhub C360 + DF-617 + PC-207 + FS-527 INSTALLATION MANUAL Name Q’ty SD-509 + MK-713 1. User’s guide holder 1909 (75-3/16) 2. Quick guide Applied Machines: (Copy/Fax/Scan/Box operations) * (25-7/8) (39) (10-1/4) 3. Crown Electric Forklift Service Manual there. Removing the machine VI. Removing protective tape, packing and 2.
New bizhub colour C360/C280/C220 MFPs with refined black-and-white-line design maximise document solutions and network security. New inner finisher, engine and advanced processing for superb image quality, plus enhanced UI and major functions enable higher productivity and reliability for TCO reduction. Improved installation and setup. Konica Minolta Bizhub C220 C280 C360 SERVICE MANUAL - Free download as PDF File (.pdf), Text File (.txt) or read online for free. Konica Minolta Bizhub C220 C280 C360 SERVICE MANUAL. Printed manual Overview [Quick Guide Copy/Print/Fax/Scan/Box Oper-ations]. Bizhub C360/C280/C220 1-3 1.2 Use conditions 1 1.1.2 User's Guide This User's Guide is intended for us ers ranging from those using this mach ine for the first time to administra-tors.
Open the right door and remove the protective 4. Install the furnished control panel. Sheet and packaging materials. Note: other shipping materials / Installing the 1. Unpack and remove the machine package. Note: Insert the hook of the control panel into the posi- 2.
Remove the protective sheet. Open the front door and remove the protective 13. Slightly slide the drum unit (K) out and remove 2. Insert the toner cartridge into the machine. The protective tape. Note: • Make sure that the color is same between inserting port and the toner cartridge.
Installing the waste toner box IX. Mounting the accessory parts XI. Installing the set guide for banner 2. Connect the power cord.
Remove the protective tape from the furnished 1. Attach the cap A and B furnished with the waste toner box. Toner supply 4.
Touch “OK.” × 12. Touch “Copy”, select “A3 ”, and 5. Touch “Exit” on the Service Mode screen. Touch “Print”, select “A3 × ”, and press the start key.
Date/Time setting XIX. Serial number input 12. Touch “Copy”, select “A4 ½×11 ”, and press the start key.
Touch “Print”, select “A4 ½×11 ”, and 1. Make sure that the Service Mode screen is dis- Note: A test pattern will then be produced on the two press the start key. Affixing the paper size label XXIV. Adjusting registration of paper 10.
If the measured width A falls outside the speci- 9. Measure width A of the test pattern on the back- fied range, enter the correction value using the side of the test print produced and check that it source options Affix the paper size label. • OC-509 XXVI.